Fuel Systems Maintenance in Japan & APAC

Indoor Air Quality (IAQ) survey

EH&S training

Asbestos and Lead-based Paint Sampling

Paint Sampling for LBP and Cr(VI)

Radon Mitigation

Radon Measurement

Air Monitoring

Respirator's Fit Test

Gas Free Certification for UST

Gas Free Certification for C&C Tank

Gas Free Certification for SIXCONs

Truck Rack Flowmeter Calibration

Fuel Tank Repairs

Fuels Centrifugal Pumps Repair

Fuels Flowmeter Calibration

Comprehensive PCB survey for every transformer on MCAS Iwakuni, Japan

Comprehensive PCB Survey

Soil remediation in a residential area, following the Japanese Soil Contamination Countermeasures Act, prior to a real state transaction

Environmental Remediation

Recurring maintenance and minor repairs (RMMR) project in three U.S. Marine Corps bases in Okinawa. Project includes flowmeter calibration, dispenser calibration, PRV testing, pressure gauge testing, etc.

Fuel Systems Maintenance (RMMR)

Safety and health inspection of the workers performing a fuels pipeline coating operation at Kadena Air Base, in Okinawa, Japan

Fuels Pipeline Coating Inspection

Full noise exposure assessment was conducted. Employees working in areas above OSHA action level (85 dBA TWA) were included in the company's Hearing Conservation Program

Noise Exposure Assessment

Temperature was evaluated for hot environments (exteriors, warehouses) and cold environments (freezers, chillers). Employees working in extreme conditions were included in the company's Temperature Stress Program

Temperature Exposure Assesment

45 outlets in a child development center were sampled and analyzed for lead in water

Lead Testing in Drinking Water

Evaluated the risk of personnel working directly with HAZMAT & HAZWASTE, including proper segregation, labeling, demarcation, containment, training procedures, emergency procedures, etc.

HAZMAT & HAZWASTE Survey

VOC levels were measured for aerosol painting operations, inside painting booth, inside warehouse containing paints and solvents, etc.

VOC Exposure Assessment

Exposure to ionizing radiation was measured with a Geiger counter, mostly locations with risk to exposure to X-rays

Ionizing Radiation Assessment

Verified that refuse and recyclables were properly managed throughout all steps including collection, handling, sorting, recycling, incineration and landfilling

Integrated Solid Waste Management

Several locations were evaluated for harmful gases such as Formaldehyde, Benzene, Ammonia, Vinyl Chloride, Hydrogen Sulfide, Carbon Monoxide, Carbon Dioxide, Ozone, etc.

Indoor Air Quality (IAQ) evaluation

Fume hoods were certified following OSHA 29 CFR 1910.1450, ANSI/AIHA Z9.5-2012 and ANSI/ASHRAE 110-2016. It consisted of 2 flow visualization tests plus a face velocity test performed with a hot-wire anemometer

Fume Hood Inspections

Water from a fire prevention system was analyzed for PFOS (Perfluorooctanesulfonic acid) as a component of its AFFF (Aqueous film forming foam). Then, it took place its removal, treatment and disposal

PFOS removal, treatment and disposal

Hot work was performed in a small ship vessel at dry dock with a CS entry supervisor, CS attendant and qualified labor

Confined Space Monitoring

ACM vinyl floor tile and Lead-Based Paint from walls were abated from 4 living units. Work was completed with 6 asbestos workers, 1 AHERA Contractor/Supervisor

Asbestos & LBP Abatement

Microwave hazard/exposure assessment to antenna maintenance workers. Included an electromagnetic field (EMF) personal monitor for real-time monitoring on employees

Antenna Maintenance Workers Assessment

Multiple housing units were sampled for airborne mold using an air pump, rotameter, impactor and agar plates (Petri dishes)

Airborne Mold Sampling

Recent Projects